http://taigownersclub.forumotion.net/mach-3-mill-f10/-t1.htm Sat, 18 Jul 2009 16:38:29 GMT 10 http://i63.servimg.com/u/f63/13/33/05/12/toc_lo17.jpg http://taigownersclub.forumotion.net/mach-3-mill-f10/-t1.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/mach3-settings-for-taig-gecko-g540-t19.htm Admin Mach3 settings for Taig/Gecko G540 Postby kbillan on 05 Dec 2008 17:15 What would you all recommend i set my motor speed and accells to in motor tuning? To start with.. also- is there any way to make ignore tool change go away permanently?? as in default would be to recognize tool changes? Keith Re: Mach3 settings for Taig/Gecko G540 Postby kbillan on 06 Dec 2008 03:50 I have it set at 50 IPM now and it seems stable... Keith Mach 3 Mill Sun, 07 Dec 2008 07:42:53 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/mach3-settings-for-taig-gecko-g540-t19.htm#20 http://taigownersclub.forumotion.net/mach-3-mill-f10/mach3-settings-for-taig-gecko-g540-t19.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/problems-getting-taig-running-with-mach-3-t313.htm Bryan When in Mach 3 I try to even Jog the machine all I get is some movement in only one direction on 2 of the axis, if I change wires around I can get other axis to move again in only one direction, does anyone have a set up file I can have a copy of that I can use to set up this used machine and also let me know what version of Mach 3 you are using, I have tried with version 2 and version 3, I am new and lost as what to do, if i can get the communication between these two working i am sure the rest ... Mach 3 Mill Sat, 18 Jul 2009 16:38:29 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/problems-getting-taig-running-with-mach-3-t313.htm#1891 http://taigownersclub.forumotion.net/mach-3-mill-f10/problems-getting-taig-running-with-mach-3-t313.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/how-many-people-use-mach-3-to-run-their-taigs-t20.htm Admin mach 3 Postby tbaxter on 03 Dec 2008 09:04 how many people use Mach 3 to run their Taigs ? Does is use regular Fanuc G.code ? Re: mach 3 Postby ASTROGUY on 03 Dec 2008 18:34 I have been using Mach 3 since I got my Taig and love it. Re: mach 3 Postby awerby on 05 Dec 2008 20:59 tbaxter wrote:how many people use Mach 3 to run their Taigs ? [Taig has been bundling Mach with the new DSLS mills since they were introduced, so there's starting ... Mach 3 Mill Sun, 07 Dec 2008 07:44:58 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/how-many-people-use-mach-3-to-run-their-taigs-t20.htm#21 http://taigownersclub.forumotion.net/mach-3-mill-f10/how-many-people-use-mach-3-to-run-their-taigs-t20.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/tutorial-design-to-cut-t281.htm Countryman
As various CNC parts for my Taig Mill are in the post (thanks Jeff!) its time I got to grips with Mach3. Are there any tutorials of how to take a design in say AutoCad to cutting metal?

Cheers,]]> Mach 3 Mill Fri, 22 May 2009 16:36:31 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/tutorial-design-to-cut-t281.htm#1604 http://taigownersclub.forumotion.net/mach-3-mill-f10/tutorial-design-to-cut-t281.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/mach-3-stoppage-t266.htm slyguyfry I have been having trouble with mach 3 running long programs. lately I have finished my digitizing probe and went to digitize a part and only got 500 lines. I tried it a second time and it stopped in the same place. Once I stop running the g code all that happens is the last line of code repletes its self from where it stopped to the end of the window. Has any one experienced this or knows how to fix this? Also, what are you all using to work with the point clouds? Mach 3 Mill Tue, 14 Apr 2009 04:23:38 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/mach-3-stoppage-t266.htm#1498 http://taigownersclub.forumotion.net/mach-3-mill-f10/mach-3-stoppage-t266.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/griffin-powermate-only-selects-axis-t246.htm blmartech Ok, so i bought the griffin powermate, hooked it up, when i press the knob in, it goes through the different axis like it should but does nothing when i turn it, I am using the powermate plugin, Also i saw a few post's on the internet in other forums with people having the same issue, but there where no solutions or posts it was just them asking for help. I updated mach3 to the latest version, and downloaded the plugin directly from the artsoft site. you would think it would work.... They ... Mach 3 Mill Sat, 28 Mar 2009 11:31:53 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/griffin-powermate-only-selects-axis-t246.htm#1376 http://taigownersclub.forumotion.net/mach-3-mill-f10/griffin-powermate-only-selects-axis-t246.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/anyone-here-using-the-smoothstepper-usb-motion-control-interface-t120.htm jalessi
Please let me know how you like it?

Any feedback would be awesome.

Jeff...]]> Mach 3 Mill Fri, 16 Jan 2009 20:39:38 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/anyone-here-using-the-smoothstepper-usb-motion-control-interface-t120.htm#482 http://taigownersclub.forumotion.net/mach-3-mill-f10/anyone-here-using-the-smoothstepper-usb-motion-control-interface-t120.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/joy-stick-t239.htm swhite
Steve]]> Mach 3 Mill Mon, 23 Mar 2009 22:56:20 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/joy-stick-t239.htm#1329 http://taigownersclub.forumotion.net/mach-3-mill-f10/joy-stick-t239.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/mach3-problem-t219.htm telder4336 I created a few parts last night, cshut everything down and cleaned up and went to bed. I wake up today and I go to make a few other parts and when I run Mach3, it tells me that an External E-Stop was requested and it won't let me run the machine. I'm using the G540 controller and everything seems to be working fine otherwise but it won't move the machine. Any ideas? Mach 3 Mill Mon, 02 Mar 2009 02:03:22 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/mach3-problem-t219.htm#1233 http://taigownersclub.forumotion.net/mach-3-mill-f10/mach3-problem-t219.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/cnc-taig-mach-3-scale-t214.htm slyguyfry what scale should i be running on the axises* for a Taig std screw on mach 3? Mach 3 Mill Thu, 26 Feb 2009 22:05:15 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/cnc-taig-mach-3-scale-t214.htm#1191 http://taigownersclub.forumotion.net/mach-3-mill-f10/cnc-taig-mach-3-scale-t214.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/help-please-t119.htm Anonymous
I get crazy circles for some reason.]]> Mach 3 Mill Fri, 16 Jan 2009 09:12:09 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/help-please-t119.htm#471 http://taigownersclub.forumotion.net/mach-3-mill-f10/help-please-t119.htm http://taigownersclub.forumotion.net/mach-3-mill-f10/what-version-mach-3-is-everyone-using-t39.htm Anonymous
I see some of you are using 2.6 WHY ?, I am not going to update this time around as soon as I find 1 that works for me

Thanks]]> Mach 3 Mill Mon, 08 Dec 2008 06:07:18 GMT http://taigownersclub.forumotion.net/mach-3-mill-f10/what-version-mach-3-is-everyone-using-t39.htm#64 http://taigownersclub.forumotion.net/mach-3-mill-f10/what-version-mach-3-is-everyone-using-t39.htm