http://taigownersclub.forumotion.net/projects-f11/-t1.htm Cool Stuff made with your Taig Tue, 13 Oct 2009 20:47:04 GMT 10 http://i63.servimg.com/u/f63/13/33/05/12/toc_lo17.jpg http://taigownersclub.forumotion.net/projects-f11/-t1.htm http://taigownersclub.forumotion.net/projects-f11/a-toy-for-boys-t354.htm Dean W


Dean
Projects]]> Projects Mon, 14 Sep 2009 01:41:17 GMT http://taigownersclub.forumotion.net/projects-f11/a-toy-for-boys-t354.htm#2331 http://taigownersclub.forumotion.net/projects-f11/a-toy-for-boys-t354.htm http://taigownersclub.forumotion.net/projects-f11/4-axis-t363.htm jes Programmed and cut my own design , models of wax for foundry.
(wedding-rings)
Thanks for look.
]]> Projects Tue, 13 Oct 2009 20:47:04 GMT http://taigownersclub.forumotion.net/projects-f11/4-axis-t363.htm#2407 http://taigownersclub.forumotion.net/projects-f11/4-axis-t363.htm http://taigownersclub.forumotion.net/projects-f11/fancy-looking-flashlight-t46.htm DaveDu Hi Folks, I am thinking about constructing a flashlight like the one in this link: http://www.gearcrave.com/buyers-guide/gadgets/lumencraft-gatlight-pupil-searing-space-power/ Although I am not going to go anywhere near titanium I am thinking of brass or aluminium (or both) to make it a bit easier on my Taigs. If anyone else is thinking of the same project (after seeing this), please post a thread and let me know where you would start, and any issues you could see cropping ... Projects Tue, 09 Dec 2008 09:10:31 GMT http://taigownersclub.forumotion.net/projects-f11/fancy-looking-flashlight-t46.htm#88 http://taigownersclub.forumotion.net/projects-f11/fancy-looking-flashlight-t46.htm http://taigownersclub.forumotion.net/projects-f11/gift-for-the-wife-t351.htm Bryan This is a rough copy of something I have seen before and influenced by the "early Christmas gifts" I saw earlier. It is machined out of Corian Plastic also but with the surface finish very fine it almost feels like soapy bone. Bryan only bad part was I broke my bit after this by rapiding it into a clamp while not paying close attention, and starring at the finished work, pout, now i have to find a place that sells engraving bits and takes Pay-Pal By ... Projects Tue, 08 Sep 2009 00:22:54 GMT http://taigownersclub.forumotion.net/projects-f11/gift-for-the-wife-t351.htm#2319 http://taigownersclub.forumotion.net/projects-f11/gift-for-the-wife-t351.htm http://taigownersclub.forumotion.net/projects-f11/some-early-xmas-gifts-t339.htm fretsman I've been working on a couple of gifts (pendants) for my wife and daughter and thought I'd share. They're made from Corian and this stuff is really fun to work with and it has that nice vintage glow like ivory. For scale, the jump ring hole is .062. For my daughter, the guitar pick. She's not a guitar player but a rocker at heart for sure. For my wife, the oval pendant and it's the #27 intertwined and mirrored with a some engravings all around the edge. The #27 is just a little "inside" ... Projects Sat, 22 Aug 2009 20:36:28 GMT http://taigownersclub.forumotion.net/projects-f11/some-early-xmas-gifts-t339.htm#2161 http://taigownersclub.forumotion.net/projects-f11/some-early-xmas-gifts-t339.htm http://taigownersclub.forumotion.net/projects-f11/native-symbol-t343.htm Bryan Ok, DAVE....... not to sound like twitter or anything..... I got a lovely image from one of you, thank-you, and I have since refined the drawing, coded it and cut it... Here is the result in ALUMINUM..... now if ANY OF YOU have a good source of 60deg or 90 deg cutters in a 0.250" diameter cutter with tough points as I tend to cut with mainly the points for carving designs. in various materials. This one will be blown up later and put on a Paddle or a pipe (shrunk) ... Projects Wed, 26 Aug 2009 01:37:45 GMT http://taigownersclub.forumotion.net/projects-f11/native-symbol-t343.htm#2214 http://taigownersclub.forumotion.net/projects-f11/native-symbol-t343.htm http://taigownersclub.forumotion.net/projects-f11/welding-pointer-t328.htm Bryan Hello Guys, thanks to everyones help I have drawn, programmed and cut my own design welding pointer and bottle opener combo. Yes it could be a little longer, but hay I tested it, and it works like a charm! Thanks again to everyone! ohhh I guess some photos might be nice eh? First cuts: Finished cutting: Cleaned off parts: Anyone want the code? Bryan Projects Thu, 13 Aug 2009 04:27:06 GMT http://taigownersclub.forumotion.net/projects-f11/welding-pointer-t328.htm#2037 http://taigownersclub.forumotion.net/projects-f11/welding-pointer-t328.htm http://taigownersclub.forumotion.net/projects-f11/last-minute-gift-o-t67.htm fretsman This is my first actual V Carve project and it was done on my little Taig mill for my wife as another last minute gift. The size is 2.000 X 6.000 at a .500 thick and is made from mahogany. I first machined it, then stained it with rosewood gel stain, then before it was completely dry, I lightly sprayed it with satin black paint. Then, just before that was completely dry, I used a toothbrush to remove and blend the black paint and stain to give it that "antiquish" look. After everything ... Projects Sun, 21 Dec 2008 13:23:21 GMT http://taigownersclub.forumotion.net/projects-f11/last-minute-gift-o-t67.htm#179 http://taigownersclub.forumotion.net/projects-f11/last-minute-gift-o-t67.htm http://taigownersclub.forumotion.net/projects-f11/trigger-setup-for-a-tippmann-x7-paintball-gun-t53.htm blmartech ]]> Projects Wed, 10 Dec 2008 04:23:53 GMT http://taigownersclub.forumotion.net/projects-f11/trigger-setup-for-a-tippmann-x7-paintball-gun-t53.htm#105 http://taigownersclub.forumotion.net/projects-f11/trigger-setup-for-a-tippmann-x7-paintball-gun-t53.htm http://taigownersclub.forumotion.net/projects-f11/mill-handles-t289.htm DaveDu Just finished making some handles for the mill. I have dual shaft steppers on my mill. I find the need to use the mill sometimes manually as its much quicker for me to set up. The handles can go on very quickly and are very nice to use. The brass handle rotates around a steel pin that screws into the aluminium part. The reason they look so complex is because I messed up I first made them so that there would be a 'friction' type grip by clamping the brass onto the motor shaft.......but ... Projects Mon, 01 Jun 2009 18:55:41 GMT http://taigownersclub.forumotion.net/projects-f11/mill-handles-t289.htm#1667 http://taigownersclub.forumotion.net/projects-f11/mill-handles-t289.htm http://taigownersclub.forumotion.net/projects-f11/amplifier-head-plates-t259.htm fretsman
Drew it up in VCarve Pro and cut out 2 of them today.

They're 4" X 6" and made from bushed black engraving material.

Thanks,
Dave

]]> Projects Sun, 05 Apr 2009 00:48:12 GMT http://taigownersclub.forumotion.net/projects-f11/amplifier-head-plates-t259.htm#1430 http://taigownersclub.forumotion.net/projects-f11/amplifier-head-plates-t259.htm http://taigownersclub.forumotion.net/projects-f11/my-robotic-arm-t218.htm blmartech This is my first project after the g540 conversion, I am not finished with the base and shoulder joint, (I am going to work on it today as soon as i get some of my freelance programing done....work first anyway thought Id share a sneak peek with you guys. Projects Sun, 01 Mar 2009 18:18:17 GMT http://taigownersclub.forumotion.net/projects-f11/my-robotic-arm-t218.htm#1231 http://taigownersclub.forumotion.net/projects-f11/my-robotic-arm-t218.htm http://taigownersclub.forumotion.net/projects-f11/touch-off-platehelp-needed-for-gecko-540-setup-t136.htm Admin
if so can you help an Electronicaly Challenged individual like myself with a diagram on the setup procedure.....]]> Projects Sun, 25 Jan 2009 18:47:55 GMT http://taigownersclub.forumotion.net/projects-f11/touch-off-platehelp-needed-for-gecko-540-setup-t136.htm#561 http://taigownersclub.forumotion.net/projects-f11/touch-off-platehelp-needed-for-gecko-540-setup-t136.htm http://taigownersclub.forumotion.net/projects-f11/this-is-a-cyclone-feeder-ratchet-replacement-out-of-auminum-for-x7-paintball-gun-4th-axis-table-t54.htm blmartech

This replaces a cheap plastic piece that breaks in tippmann x7 or A5 paintball guns]]> Projects Wed, 10 Dec 2008 04:28:00 GMT http://taigownersclub.forumotion.net/projects-f11/this-is-a-cyclone-feeder-ratchet-replacement-out-of-auminum-for-x7-paintball-gun-4th-axis-table-t54.htm#106 http://taigownersclub.forumotion.net/projects-f11/this-is-a-cyclone-feeder-ratchet-replacement-out-of-auminum-for-x7-paintball-gun-4th-axis-table-t54.htm http://taigownersclub.forumotion.net/projects-f11/tapping-guide-t187.htm aztaig
]]> Projects Sun, 08 Feb 2009 22:35:15 GMT http://taigownersclub.forumotion.net/projects-f11/tapping-guide-t187.htm#967 http://taigownersclub.forumotion.net/projects-f11/tapping-guide-t187.htm http://taigownersclub.forumotion.net/projects-f11/1st-venture-into-meshcam-t164.htm fretsman Thought I'd share my first project with MeshCam. It's all new to me so it will take a little bit of playing with to get the hang of it and unfortunately time is pretty much non-existant lately. My wife and I hate the commercialism of Valentines day so we always make each other cards instead of buying them. I thought this would be a nice addition to the card as well. It's made from a piece of 2.5" by 5" X 3/8" Cherry and the full depth is about .120. I started with an ... Projects Sun, 01 Feb 2009 21:16:46 GMT http://taigownersclub.forumotion.net/projects-f11/1st-venture-into-meshcam-t164.htm#785 http://taigownersclub.forumotion.net/projects-f11/1st-venture-into-meshcam-t164.htm http://taigownersclub.forumotion.net/projects-f11/laser-scanner-wip-t144.htm blmartech I have a few projects going right now here is one of them, its not finished and the picture quality is bad. This is my laser scanner running my vb program to control servos in cooperation with david laser scan software will post more as i go Projects Wed, 28 Jan 2009 12:56:16 GMT http://taigownersclub.forumotion.net/projects-f11/laser-scanner-wip-t144.htm#647 http://taigownersclub.forumotion.net/projects-f11/laser-scanner-wip-t144.htm http://taigownersclub.forumotion.net/projects-f11/custom-cabinet-pulls-t59.htm blmartech
i did these for a cabinet i built for my son]]> Projects Sat, 13 Dec 2008 01:37:27 GMT http://taigownersclub.forumotion.net/projects-f11/custom-cabinet-pulls-t59.htm#135 http://taigownersclub.forumotion.net/projects-f11/custom-cabinet-pulls-t59.htm http://taigownersclub.forumotion.net/projects-f11/my-motion-turret-t56.htm blmartech

This was made on a taig]]> Projects Thu, 11 Dec 2008 01:24:54 GMT http://taigownersclub.forumotion.net/projects-f11/my-motion-turret-t56.htm#120 http://taigownersclub.forumotion.net/projects-f11/my-motion-turret-t56.htm http://taigownersclub.forumotion.net/projects-f11/don-t-know-how-to-post-you-tube-screen-t55.htm timothysvec can anyone help me with this Projects Wed, 10 Dec 2008 17:25:23 GMT http://taigownersclub.forumotion.net/projects-f11/don-t-know-how-to-post-you-tube-screen-t55.htm#109 http://taigownersclub.forumotion.net/projects-f11/don-t-know-how-to-post-you-tube-screen-t55.htm http://taigownersclub.forumotion.net/projects-f11/cork-rescue-t48.htm timothysvec www.CorkRescue.com also have a vid of the body being machined on youtube
cheers,

tim]]> Projects Tue, 09 Dec 2008 16:44:02 GMT http://taigownersclub.forumotion.net/projects-f11/cork-rescue-t48.htm#91 http://taigownersclub.forumotion.net/projects-f11/cork-rescue-t48.htm