http://taigownersclub.forumotion.net/pics-f13/-t1.htm Wed, 25 Mar 2009 17:37:15 GMT 10 http://i63.servimg.com/u/f63/13/33/05/12/toc_lo17.jpg http://taigownersclub.forumotion.net/pics-f13/-t1.htm http://taigownersclub.forumotion.net/pics-f13/enclosure-build-t242.htm blmartech Control panel just finished. I still need to finish the door. Pics Wed, 25 Mar 2009 17:37:15 GMT http://taigownersclub.forumotion.net/pics-f13/enclosure-build-t242.htm#1352 http://taigownersclub.forumotion.net/pics-f13/enclosure-build-t242.htm http://taigownersclub.forumotion.net/pics-f13/how-to-destroy-taig-spindle-bearings-t153.htm Jeff_Birt Did the title get your attention? This is a Taig CNC mill that a friend of mine is using for research for his PhD work. He is thrashing the spindle bearings so he can apply a prognostic fault detection (prediction) technique that he has developed. I thought you guys might want to see the mill all decked out with accelerometers/temp sensors. They are the small things with the wires sticking out. He is milling the 1/5" AL plate shown in 1/8" steps. He goes through plate after plate, it ... Pics Fri, 30 Jan 2009 20:09:42 GMT http://taigownersclub.forumotion.net/pics-f13/how-to-destroy-taig-spindle-bearings-t153.htm#720 http://taigownersclub.forumotion.net/pics-f13/how-to-destroy-taig-spindle-bearings-t153.htm http://taigownersclub.forumotion.net/pics-f13/1-4-hp-6000-rpm-dc-motor-t160.htm aztaig

Admin, hope this was the right way to do the link.]]> Pics Sun, 01 Feb 2009 04:01:27 GMT http://taigownersclub.forumotion.net/pics-f13/1-4-hp-6000-rpm-dc-motor-t160.htm#761 http://taigownersclub.forumotion.net/pics-f13/1-4-hp-6000-rpm-dc-motor-t160.htm