cnc taig mach 3 scale

slyguyfry · Number of posts: 27 Registration date: 2009-01-14

what scale should i be running on the axises* for a Taig std screw on mach 3?

Admin · Number of posts: 573 Registration date: 2008-12-05 Age: 49

Use The Standard 1.000

The Scaling Feature has nothing to do with the LeadScrew.....

Its used to Enlarge or Shrink the Part that is loaded into Mach 3

slyguyfry · Number of posts: 27 Registration date: 2009-01-14

oops yes its important to read the mach 3 manual cover to cover. IT ended up being a setting in the motor tuning pulses per revolution with the taig and g540 works out to be 40000 pulses per revolution. Ironically the last time I did not read the directions i ended up lighting my back porch on fire with wisperlight stove.

blmartech · Subject: Re: cnc taig mach 3 scale Wed Mar 04, 2009 3:28 am

if all fails, read the manual....lol

Admin · Number of posts: 573 Registration date: 2008-12-05 Age: 49